The Filters Fast FF-0220 is the compatible replacement pool and spa filter for the Filbur FC-1270. This filter is constructed from durable, corrosion-resistant, polymeric materials for long-lasting performance, and requires no backwashing. The filter is cleaned by removing the cartridge element, hosing it off and soaking it in a filter cleaner for 1 to 2 hours. The filter can also be easily cleaned with water from your garden house on a routine basis. Filters Fast recommends replacing the FF-0220 every 1 to 2 seasons for optimum performance.
Part number: FF-0220
Replaces part number: FC-1270
Length: 32 7/8 inches
Diameter: 7 1/8 inches
Top: 3 inches
Bottom: 3 inches
Square feet: 145 sq. ft.
The Filters Fast FF-0220 is a compatible replacement for the following pool and spa filters:
Jandy CL 580 145 sq. ft.
Cleaning your Filters Fast FF-0220 Filter
It is time to clean your spa or pool filter cartridge when you notice a decrease in the pressure from your jets, or when the pressure in your pool filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the pool filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the pool filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons of water.
Thoroughly rinse the pool filter cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the replacement pool filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the pool filter cartridges as these methods can damage the filter media.