The Filters Fast FF-0191 is the compatible replacement pool and spa filter for the Filbur FC-0810. It uses three essential components - spunbound polyester pleated filter media, thermally bonded polyurethane caps and punched PVC pipe - that provides lasting durability and continuous, crystal-clear water flow. The FF-0191 also meets and/or exceeds compatible OEM pool filters in performance and longevity, it also prevents microbes, such as bacteria, mold, fungi, and mildew from growing or reproducing. Even when you backwash, the FF-0191 can handle large amounts of dirt and waste water with ease.
Part number: FF-0191
Replaces part number: FC-0810
Media: 4 oz.
Diameter: 7 inches
Length: 27 inches
Top: Open 3 inches
Bottom: Open 3 inches
Area: 115 sq ft
The Filters Fast FF-0191 is a compatible replacement for the following pool and spa filters:
Cleaning your Filters Fast FF-0191 Filter
It is time to clean your spa or pool filter cartridge when you notice a decrease in the pressure from your jets, or when the pressure in your pool filter tank increases by 8 psi from when the filter was newly installed.
In order to clean the pool filter, first remove it from its canister and use a garden hose to dislodge any debris between the pleats. Soak the pool filter in commercially prepared filter cleaner, or spray with the same to remove organic material and oils. To remove stains soak overnight in a solution of one quart bleach and 5 gallons of water.
Thoroughly rinse the pool filter cartridge with fresh water and reinstall it into the canister. Be sure to follow manufacturer's directions for installing the replacement pool filter.
DO NOT use a high-pressure car wash wand, a stiff brush or acid wash to clean the pool filter cartridges as these methods can damage the filter media.